{"id":21613,"date":"2025-07-11T09:37:26","date_gmt":"2025-07-11T07:37:26","guid":{"rendered":"https:\/\/redverde.es\/tienda\/fibra-de-madera-fina-8-mm\/"},"modified":"2026-07-24T13:04:38","modified_gmt":"2026-07-24T11:04:38","slug":"fine-wood-fiber-8-mm","status":"publish","type":"product","link":"https:\/\/redverde.es\/en\/shop\/fine-wood-fiber-8-mm\/","title":{"rendered":"Fine wood fiber 8 mm"},"content":{"rendered":"

Scope of application<\/strong> Wood fiberboard (HFA) as a partition base in timber constructions for CLAYTEC clay partitions in interiors. On surfaces exposed to water of class W0-I according to DIN 18534-1, for example, in bathrooms (excluding the shower area) and kitchens. Material properties<\/strong> Compressive strength \u2265 100 kPa, Apparent density 230 kg\/m\u00b3, Thermal conductivity 0.05 W\/mK, \u00b5 5. Heat storage: Cp 2.1 kJ\/kgK, 3.9 kJ\/m\u00b2K. Fire performance according to DIN EN 13501-1: E Dimensions<\/strong> Thickness = 8 mm. Length = 1200 mm, Width = 600 mm. Surface area per board = 0.72 m\u00b2. Delivery Format<\/strong> 276 individual boards\/pallets. Storage<\/strong> Stored horizontally on pallets in a dry place. Storage is unlimited. Protect from moisture during transport and on-site storage. On-site, store horizontally on dry pallets or wood. Protect edges from damage. Humidity<\/strong> Generally, the relative humidity should not exceed 70% during storage or after installation. Material Requirements<\/strong> When determining material requirements, allow approximately 10% for waste, etc. Substrate<\/strong> The substrate must be stable, frost-free, dry, clean (wooden boards must be dust-free), free from salt exposure, and sufficiently rough and absorbent. Fill any imperfections. Fix sandy substrates with CLAYTEC clay primer and sealer. Processing<\/strong> Cut the boards with a jigsaw, circular saw, or utility knife. The bottom row of boards should be installed with some spacing to allow for floor ventilation. Mount flat on wood or wood-based material using screws (CLAYTEC clay construction board screws spaced 200 mm apart), but typically use 25 mm brackets, such as Haubold KG 700 series brackets (ETA approved), spaced approximately 150 mm apart, with a 25 mm gap between edges (measured from the center of the bracket). Do not drill holes in the wood boards for screws or brackets.<\/p>\n","protected":false},"excerpt":{"rendered":"

Fine wood fiberboard (HFA) as a partition base over wood and other wood materials. The boards can be screwed or stapled. This easily creates a base on the wood for the reinforcing layer of clay mortar and reinforcement, and the subsequent clay finish. For more information about the product, please consult the TECHNICAL DATA SHEET.<\/strong>