56,71€ IVA Incluido
Clay putty for filling over the ClayTec topcoat and other sufficiently smooth substrates such as plaster surfaces, clay boards and partition boards, etc. for subsequent painting, also for the YOSIMA design plaster.
This filler filler can be used to fill joints, imperfections and holes, and is also suitable for refinishing the entire surface. The possible application thickness in a single application is 0-3 mm. The surface can be smoothed. It is also possible to sand it by hand or machine. Clay filler is a versatile product in terms of application. It is available in natural brown and light natural shades. The light natural shade is recommended as a base for light-colored finishes.
For more information about the product, please consult the TECHNICAL SHEET.
Ingredients: Sparkling glass, clay and marl, limestone powder, talc, cellulose, methylcellulose < 1%
Delivery methods, packaging: 10 kg bucket, 33 pcs European pallet (7.5 litre putty, approx. 7.5 m² surface area with 1 mm thickness. Approx. 1.33 kg/m² per mm plaster thickness).
Storage It can be stored in a dry and cool place for an indefinite period.
Preparation: 10 kg of dry mass is gradually mixed with approximately 5 litres of clean water using a drill (≥ 800 watts) or a paddle stirrer (Ø 125 mm). The consistency should be pasty, suitable for the desired application method with trowel or spatula.
Let the mixture sit for 30 minutes and then stir well. The putty is now ready for application.
Support The substrate must be stable, non-elastic, frost-free, dry, clean, salt-free and sufficiently rough.
Working method: Imperfections and holes should be filled in first, if necessary several times. Allow to dry each time.
Clean surfaces before applying caulk. The putty can be applied with a thickness of 0-3 mm in each work session. The clay putty is spread with a trowel on the surface.
If smoothing is required, it is done with light pressure and a closed trowel, the time necessary to achieve a smooth and closed surface.
Working Time Once mixed, the putty remains usable for 24 hours if kept covered.
Hardening The hardening time is 24 hours, depending on the drying conditions and absorbency of the substrate.
Sample applications: Substrate suitability, adhesion and surface results should always be checked by sufficiently large sample applications.
If you have any questions regarding application, yield, compatibility, or quantities, please write to us. We will provide a clear and personalized response.
Tell us about your project (type of surface, square meters, interior or exterior, existing substrate…). The more details you provide, the better we can guide you.
At RedVerde, we are here to help you choose with confidence.
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.