OSMO Decking Oil for Outdoor Woods

Technical Information:

• Yield: 1 liter covers approximately 24 m2 in one hand.
• Density: 0.85-0.95 g/cm3
• Viscosity: 30-60 s DIN EN ISO 2431/3 mm, viscous
• Odor: Mild /light; Odorless once dry
• Flash point: >60° C, according to DIN EN ISO 2719

It is used for...

Osmo Decking Oil maintains and protects outdoor wooden floors, garden furniture and lattices or fences, made of all types of conifers, tropical or leafy, e.g. Copper-plated pine, Douglas fir, oak or Bangkirai.

Also valid as a transparent color treatment of Teka, Eucalyptus and other exotic and even heat-treated woods.

Storage:

Up to 5 years or more if the can has been kept firmly closed and in a dry place. If frozen, store at room temperature 24 to 36 hours before use.

Surface preparation:

The wooden surface must be clean, dry and frost-free (maximum humidity. 18%). Osmo Oil-Wax Original is ready to be used. Do not mix. Shake before use. Clean old microporous finishes thoroughly. Paints and old varnishes must be removed. As a general rule, wear a mask during floor polishing. Fill in any small imperfections, joints or holes in the wood (with Osmo Wood Paste). Polish wooden surfaces carefully. Start with coarse sandpaper – final sanding with P120-150, for furniture P180-240. Before oiling the surface, remove dust with a broom or vacuum. The finished surface, among other things, is influenced by the natural characteristics of the wood. We therefore recommend a test application, especially on unfamiliar surfaces. For more information about the product, please consult the TECHNICAL SHEET.