Osmo Outdoor Campaign Paint

Technical information:

• Yield: 1 liter covers approximately 26 m2 with one layer.
• Density: 1.0-1.35 g/cm3
• Viscosity: 20-60 according to EN ISO 2431/4 mm, viscous
• Odor: mild/light; Odorless once dry
• Flash point: >60°C, according to EN ISO 2719

Used for:

Osmo Field Paint is recommended for all types of exterior wood where particularly high durability is required: wooden facades, balconies, windows and shutters, fences, pergolas, wooden roof tiles, garden furniture, summer houses, garages, etc. Ideal for the renovation of weathered wood and old microporous finishes.

Storage:

Up to 5 years and longer if the can is stored in a dry place and tightly sealed. If it solidifies due to cold, store for 24-36 hours at room temperature before use.

Surface Preparation:

The surface must be clean, dry, and frost-free (maximum wood moisture content 20%). Osmo Camp Paint is ready to use; please do not dilute. Shake well before use. If possible, apply the first coat to all surfaces before installation. Thoroughly clean any previous microporous coatings. Old paints or varnishes must be completely removed. As a general rule, you should wear a dust mask during sanding. The surface finish depends on several factors, including the natural characteristics of each type of wood. Therefore, you should perform a test beforehand, especially on unfamiliar surfaces. For added protection against blue stain, fungi, or insects, you must first treat all sides of the wood with Osmo WR Primer. For APPLICATION INSTRUCTIONS or further product information, please consult the TECHNICAL DATA SHEET.