23,03€ IVA Incluido
Synthetic emulsion resin, colorless, solvent-free and with selected grains, which once dry prevents the rise of air bubbles and allows the coating to grip with anti-slip effect.
For indoor use. As a primer and as an adhesion point for MORTEX,® BEALSTONE® and similar products. Fixative hardener for porous and absorbent substrates (plasters, coatings, plaster, masonry with argilo-calcareous stoneware, terracotta, fiber cement, concrete, aerated concrete, mortars, old paints with high adhesion).
For more information about the product, please consult the TECHNICAL SHEET.
In stock
Advantages:
- Solvent-free
- Prevents the rise of air bubbles.
- Allows grip with anti-slip effect
- Prevents air bubbles from rising
Format:
5 kg containers
Storage:
6 months in a dry place, protected from frost and without direct contact with the ground in the original closed packaging. Never leave products in full sun.
Consumption: 250 to 350 g/m² depending on porosity.
Drying times (at 20°C):
Dry to the touch: 3 hours
Complete drying: 6 to 8 hours
Application of RESIPACT G
Support and preparation:
Before and after application, the substrate must be clean, dry, matte, grease-free. It should be hard, without a gelatinous or brittle appearance. Remove all non-adherent or weakly cohesive part, as well as any substance that may affect adhesion. Clean thoroughly. There should be no standing water on the surface at the time of application.
Preparation of the mixture:
It is ready to use and applies as is.
Application:
Applies with brush, brush or roller in one layer
If you have any questions regarding application, yield, compatibility, or quantities, please write to us. We will provide a clear and personalized response.
Tell us about your project (type of surface, square meters, interior or exterior, existing substrate…). The more details you provide, the better we can guide you.
At RedVerde, we are here to help you choose with confidence.
