COLORMIN Interior/Exterior Silicate Paint

PROPERTIES: Its innovative formula, based on special alkali silicate dispersions, is reinforced with nanosilanes, providing exceptional durability. Weather-resistant, it boasts Class 1 wet scrub resistance (ISO 11998), Class 1 opacity and coverage for a yield of 5 m²/l (ISO 6504-3), a matte finish (EN ISO 2813), and a fine particle size (EN 21524), classified according to DIN EN 13300. It exhibits very high water vapor permeability and is highly breathable according to EN 7783-2, with Class V1 and SD = 0.004 m. It also possesses high resistance to liquid water, with low permeability according to EN 1062-3, with Class W3 and yw = 0.09 Kg/m²•h⁰.⁵. It is odorless and low VOC. Fire-retardant (class A2-s1d0 according to EN 13501-1). AREAS OF USE: Apply to clean, dry, and cured surfaces that are properly consolidated, free of anti-adherent substances, and finally primed with SellarMin for mineral bases. Suitable surfaces: Cement or concrete plaster, porous natural or artificial stone, sand and lime mortars, brick walls, mineral paints, fiber cement boards, gypsum surfaces, and/or Pladur® (primed with SellarMin). Always ensure proper curing of fresh mortars. • Unsuitable surfaces: Plastics, wood, plastic paints, oil paints, enamels, and lacquers. VOC CONTENT: Category: c (BA) Maximum 40 g/l VOC (2010). The product contains less than 10 g/l VOC. For further information about the product, please consult the TECHNICAL DATA SHEET.