720,81€ IVA Incluido
The ClayTec 06 fine clay coating offers all the advantages of clay mortars reinforced with long fibres. Its preparation is simple, and its application is extremely easy, avoiding the accumulation of fibers both in the mixer and on the surface.
With a pasty and flexible consistency, this mortar has a very fine granulometry of up to 0.6 mm, which allows a uniform distribution and precise work on the surface. Fine clay plaster 06 is designed for thin-layer applications.
For more information about the product, please consult the TECHNICAL SHEET.
Out of stock
APPLICATION
The mortar is applied with a trowel or by mortar spraying machine. Minimum and maximum application thickness: 2 to 3 mm. The texture of the surface will depend on the time of application and the tool used. In general, the more hardened the mortar is at the time of application, the finer the texture. Rough surfaces are obtained with sponge boards, plastic or wood, while smooth surfaces are achieved with a smoother.
PERFORMANCE
Wet mortar in 0.8 t Big Bags (results in 544 l of clay mortar, 182 m2 surface with D= 3 mm)
DRYING TIME
Drying After application, rapid drying must be ensured, e.g. by cross ventilation (all windows and doors open 24 hours a day) or drying equipment. Under critical conditions, drying must be recorded in accordance with DIN 18550-2, for more details see there or in the ClayTec "Clay Plaster Worksheet". We will be happy to provide you with information separately.
WORK SAMPLE
It is essential to verify the suitability of the substrate, the thickness of the layer and the effect of the surface by means of a sufficiently large working sample.
MATERIAL VALUES
Shrinkage on drying: 4.0%. Resistance class: S II. Flexural strength: 0.9 N/mm². Compressive strength: 2.0 N/mm². Adhesive resistance: 0.10 N/mm². Abrasion: 0.4 g. Bulk density: 1.8. Thermal conductivity: 0.91 W/m∙K. Value μ .5/10. Construction material class: A1. Water vapour adsorption class: WS III. Microbial quality class: MBKIb.
STORAGE
It can be stored indefinitely in dry conditions.
COMPOSITION
Natural construction clay, washed mixed grain sand 0-0.6 mm, fine fibres. Grain size according to DIN 0/1,
If you have any questions regarding application, yield, compatibility, or quantities, please write to us. We will provide a clear and personalized response.
Tell us about your project (type of surface, square meters, interior or exterior, existing substrate…). The more details you provide, the better we can guide you.
At RedVerde, we are here to help you choose with confidence.
Reviews
There are no reviews yet.
Only logged in customers who have purchased this product may leave a review.