Fine clay finishing plaster 06

APPLICATION: The plaster is applied with a trowel or by spray machine. Minimum and maximum application thickness: 2 to 3 mm. The surface texture will depend on the application time and the tool used. In general, the harder the plaster is at the time of application, the finer the texture will be. Rough surfaces are obtained with sponge, plastic, or wooden floats, while smooth surfaces are achieved with a trowel. COVERAGE: Dry 10.113: in 25 kg bags (yields 17 liters of plaster mortar for 5.7 m² with a thickness of 3 mm. Approximate consumption: 1.47 kg/m² per mm of plaster thickness), 48 bags per pallet. DRYING TIME: Drying: After application, rapid drying must be ensured, for example, by cross-ventilation (all windows and doors open for 24 hours a day). Under critical conditions, drying time must be recorded according to DIN 18550-2. For further details, see that standard or the ClayTec "Clay Plaster Worksheet." We would be happy to provide you with separate information. WORKING SAMPLE: It is essential to verify the suitability of the substrate, the layer thickness, and the surface effect using a sufficiently large working sample. MATERIAL VALUES: Drying shrinkage: 4.0%. Strength class: S II. Flexural strength: 0.9 N/mm². Compressive strength: 2.0 N/mm². Adhesive strength: 0.10 N/mm². Abrasion resistance: 0.4 g. Apparent density: 1.8. Thermal conductivity: 0.91 W/m∙K. µ value: 0.5/10. Building material class: A1. Water vapor adsorption class: WS III. Microbial quality class: MBKIb. STORAGE: Can be stored indefinitely under dry conditions. COMPOSITION: Natural building clay, washed mixed-grain sand 0-0.6 mm, fine fibers. Grain size according to DIN 0/1, <2 mm. Fibers: cellulose fibers.